86-769-89046417
CONTACT US

Tel:86-769-89046417

Fax:86-769-89046066

E-mail:jack@dgkenos.com

Factory Address: Shenzhen Baoan Songgang Yan State Community Yanshan Road, Building B, No. 5

Service Commissioner:Mr. Wang

Service Commissioner:Mr. Wang

Your position : HOME > INFORMATION
The die casting phone parts production steps
Copy from:    Author:kenostian    Time:2015-12-14 17:12:21    Popularity:632

    The die casting phone parts production steps are as follows:
1. The aluminum ingots into the melting furnace, the temperature to about 620 °C to molten aluminum and removing the dross.
2. Hang the corresponding die on the die casting machine and adjust the corresponding parameters.
3. At the top of the mold cavity and the hammer rod coated with lubricating oil. And then start the die casting machine at low speed, the function of which is to make the mold quickly heat up to about 300 °C.
4. After the mold temperature reaches 300 °C, the electric heating tube is put into the mold cavity (the electric heating tube must be placed in the right position).
5. Close the mold until the shot button indicates that the light is on, and then the safety door is closed.
6. The liquid aluminum into the feed port, and then press the shot button.
7. Take out the
aluminum die casting parts and check whether or not qualified after open the mold, qualified products into the turnover box, discharge neat, handle with care.
8. Removal of the product of the residual material at the gate and the exhaust port, and inspection of the product.




[Return]
PRODUCTS
Consumer electronic parts
Automotive parts
Household products
CASE
Customer Testimonials
Certificates
NEWS
Company News
Industry News
Answers
ABOUT US
About Us
Company Album
Four Advantages
Recruitment
CONTACT US
Contact Us
Feedback
Electronic Map

Copyright © 2014 Shen Zhen Chuang Hong Mei Metal Products Co.,Ltd.    

Factory Address: Bao'an District of Shenzhen City Songgang Yan State Community Yanshan Road, Building B, No. 5

Business Address: Changan Town, Dongguan Hexing shatou Southern District No. 122

Tel :86-769-89046417 Fax :86-769-89046066 E-mail: jack@dgkenos.com

Aluminum die casting|Zinc die casting|Die casting manufacturer|Magnesium die casting|Zamak die casting